Technical Data Sheet
The Andago is a mobile robotic system for overground gait and balance training providing fall
protection, dynamic body weight support and intuitive patient following
Technical Data
Mobile platform
- Two electrically driven wheels and four casters for moving forwards, backwards, and turning
- Intuitive patient-following mode, enabling the device to move and turn according to the patient’s intention
- Straight-line mode, enabling simplified training scenarios without turning
- Manual mode, enabling the therapist to steer the device
Dynamic body weight support
- Electrically operated patient lift, supporting patient setup from sitting position
- Dynamic body-weight support range: 0 to approx. 55 kg, continuously adjustable without training interruption
- Nearly constant weight support and low inertial forces (patent pending)
Batteries and charger
- Rechargeable batteries with capacity for a whole therapy day (approx. 8 hours of therapy), can be recharged over night
- Battery charger, compatible with mains connections with 100-240 V~ / 50/60 Hz
Dimensions
Outer dimensions:
- 1.07 m (42.1 in.) x 0.85 m (33.5 in.) x 1.95 m (76.8 in.) [l x w x h]
- Inner width: 0.67 m (26.38 in.)
Weight
- Approx. 185 kg (408 lb.)
Space requirements
- Minimal operating space: 1.5 m (5 ft.) x 5 m (16 ft.) [l x w]
- Recommended operating space: 3.5 m (11.5 ft.) x 7 m (23 ft.) [l x w]
Operating conditions
- Device to be operated only on level ground
- Temperature: 15 °C – 35 °C
- Humidity: 30 % – 75 % relative air humidity
- Air pressure: <1060 hPa
User interface
- Tethered, hand-held control which allows to control patient lift, body-weight support, training modes, and manual maneuvering of the device
- Display for status information
Adaptability to patients
- Patient weight max. 135 kg (297.6 lb.)
- Patient height 135 cm – 200 cm (53.15 in. – 78.74 in.)
